You just imagine what load is put on the roofs of houses and other buildings. Roofs of houses are designed and made with these loads in mind. But for the roofs of garages and other buildings are probably not designed for excessive loads from large amounts of snow. And so x must always be cleared. It's better to remove snow from the roof in any case. It's better not to take risks and not to test the strength of the structure. Otherwise it can turn into big problems. Everyone is used to removing snow with their hands and a shovel. But this method has its own risks and is not very convenient. There is a method that is much easier and more comfortable than waving a shovel.
Besides, it is free. I learned this method from a friend from Siberia, who has been practicing snow for a long time. The method is just right for low structures, houses and other buildings with a pitched roof. What we need for this: A long rope Two people cargo.
Suitable bottle filled with water What should be done: The essence of the method is to cut a continuous layer of snow with a rope to break its holistic structure. Throw a bottle or other load over the roof along the ridge (in the case if your roof has two slopes) If the roof has a hip roof, in which case the rope is located at the top of one side of the roof.
After that, the rope should be pulled at both ends on the principle of a two-handed saw. Pull back and forth, as if sawing a log. The rope cuts the layer of snow and the layer itself rolls off the surface of your roof. Do not forget to watch out for safety during the work, otherwise the snow will fall on your head. This method will only work in cold weather, when the snow is not wet. This is the disadvantage https://gfxcity.blogspot.com/.
No comments:
Post a Comment